2025 Hyundai Kona Alignment in Albuquerque, NM

Every 2–3 years or around 30,000 miles is a practical alignment interval for a 2025 Hyundai Kona.

This cadence balances normal wear with Albuquerque’s mix of city streets and high-desert routes. Schedule sooner after suspension or steering work, a hard pothole hit, curb impact, or if you notice handling changes. You can schedule service online at Larry H. Miller Southwest Hyundai Albuquerque for a factory-spec check.

• Target interval: 2–3 years or ~30,000 miles
• Align sooner after pothole/curb impacts or suspension repairs
• Local service with OEM procedures and equipment

Watch for 4 key signs: pulling, off-center steering wheel, uneven tire wear, and vibration at speed.

If your Kona drifts on a straight road, the wheel sits crooked, or tires show inner/outer edge wear, the angles may be out of spec. Mild vibration can also indicate misalignment or related tire issues. Our Albuquerque team measures caster, camber, and toe and provides a before/after printout so you can see the correction.

• Vehicle pulls left/right on a level road
• Steering wheel not centered when driving straight
• Feathered/edge tire wear or steering vibration

It includes 3 primary angle adjustments caster, camber, and toe set to factory specs plus a printed before/after report.

Our OEM-trained team inspects steering and suspension components, checks tire pressures, measures alignment on calibrated equipment, and adjusts within Hyundai specifications. You leave with documented readings and a road test confirmation. Book your appointment through our schedule service page.

• Steering/suspension inspection and tire pressure check
• Caster, camber, toe measured and set to Hyundai spec
• Printed readings and verification road test

Three common partstie rods, ball joints, and strutsoften need replacement before an alignment will hold.

If angles wont stay in range or you hear clunks, have play in the steering, or see leaking struts, underlying wear may be the cause. Our technicians inspect these items first and explain any findings before proceeding. If parts are needed, well outline options and then complete alignment to Hyundai specs.

• Check tie-rod ends and ball joints for play
• Inspect struts/mounts for leaks or damage
• Confirm bushings and subframe are secure

If it tracks straight with even tire wear, you can wait and plan alignment around symptoms or the 2–3 year/30,000-mile interval.

Not every tire rotation requires an alignment. Monitor tread for edge wear and watch steering-wheel position on straight roads. If you replace steering or suspension parts, schedule alignment right after. When youre ready, book online to keep angles in spec for better tire life and MPG.

• Defer if tracking is straight and wear is even
• Align after any steering/suspension component work
• Use the 2–3 year cadence as a planning guide

Use the online schedule service form to book your Kona alignment in Albuquerque.

Our dealership at 8800 Lomas Blvd NE makes it easy to choose a time that fits your day. Check service specials for current offers, then schedule service to lock in your appointment. We cover Albuquerque, Rio Rancho, Santa Fe, South Valley, Los Lunas, Belen, and Bernalillo.

• Schedule online in minutes
• Review current service specials before booking
• Convenient location at Lomas & Wyoming

Our alignment process for the 2025 Hyundai Kona follows Hyundais documented procedure from start to finish. We begin with a steering and suspension inspection, checking tie rods, ball joints, control arm bushings, and struts for play or leaks, and set tire pressures to spec. Next, we mount the vehicle on OEM-grade alignment equipment to measure caster, camber, and toe at each corner. Technicians adjust angles to factory ranges, addressing front and rear independently. You receive a printed before/after report to verify specs and a final road test confirms on-center tracking and stability. Ready to book your visit? Use our online portal to schedule service now.

Hyundai alignment service at Larry H. Miller Southwest Hyundai Albuquerque supports drivers throughout Central New Mexicoincluding Albuquerque, Rio Rancho, Santa Fe, South Valley, Los Lunas, Belen, and Bernalillo. High-desert conditions and frequent construction zones can knock angles out of range over time, especially after a pothole or curb strike. To restore precise steering and extend tire life, our team measures and adjusts caster, camber, and toe using calibrated OEM equipment. Find us on the southeast corner of Lomas and Wyoming at 8800 Lomas Blvd NE, Albuquerque, NM 87112. Have questions or need directions? View our map and schedule service online.

The 2025 Hyundai Kona relies on precise front and rear geometry for confident, efficient driving. Factory specifications define acceptable ranges for caster (steering axis), camber (wheel tilt), and toe (in/out), and each axle is measured and corrected independently. Using Hyundai-approved alignment equipment, our technicians set angles within those ranges and document results with a before/after printout. If any steering or suspension wear prevents settings from holdingsuch as play in tie rods, ball joints, or strutswell identify it first, then complete alignment after repair. Bring your 2025 Hyundai Kona to Larry H. Miller Southwest Hyundai Albuquerque in Albuquerque for a factory-spec alignmentschedule service.