2025 Hyundai Sonata Alignment in Albuquerque, NM

Every 2–3 years or about every 30,000 miles, and any time after suspension work or a major pothole hit.

Albuquerque’s mix of city construction zones and canyon roads can nudge alignment angles out of spec over time. Keeping your 2025 Hyundai Sonata on schedule reduces tire wear and helps maintain fuel economy. If you notice pull or an off-center wheel sooner, book an inspection.

• Target interval: 2–3 years or ~30,000 miles
• Also align after tie-rod/strut work or curb/pothole impacts
• Schedule online anytime via our service scheduler

Uneven tire wear, pulling to one side, an off-center steering wheel, or vibration at speed are the top signs.

These symptoms indicate caster, camber, or toe angles may be out of range on your 2025 Hyundai Sonata. Our Hyundai-certified technicians measure all angles and adjust to factory spec, then provide a printed report so you can see the correction.

• Steering wheel sits off-center when driving straight
• Feathered or accelerated wear on front or rear tires
• Vehicle drifts on straight, flat roads around Albuquerque

We inspect suspension, measure caster/camber/toe, adjust to factory specs, and provide before/after printouts with a road test.

Your 2025 Hyundai Sonata is set using Hyundai-approved alignment equipment for accuracy on both front and rear axles. The documentation you receive shows initial and final readings, so you know the vehicle meets specification after service.

• Suspension and steering linkage inspection
• Caster, camber, and toe measurement and adjustment to spec
• Printed before/after readings and verification road test

If tie rods, ball joints, control arm bushings, or struts are worn, an alignment won’t hold and parts need replacement first.

Our technicians check your 2025 Hyundai Sonata’s steering and suspension before adjusting angles. If a component has excessive play, we’ll show you the findings and options so the alignment is accurate and durable.

• Free-play in tie rods or ball joints prevents stable settings
• Leaking or weak struts can cause recurring pull or tire wear
• We review inspection results and next steps before work begins

No—if it tracks straight with even tire wear, you can wait until 2–3 years/30,000 miles or symptoms appear.

Many 2025 Hyundai Sonata owners align on condition rather than at every tire rotation. If you recently hit a pothole near South Valley or replaced suspension parts, schedule sooner to protect tires and handling.

• Monitor for drift, vibration, or off-center wheel
• Check tread for cupping or inside/outside edge wear
• Align sooner after suspension or steering repairs

Schedule online 24/7 using our service scheduler at Larry H. Miller Southwest Hyundai Albuquerque.

We serve the Central New Mexico region—including Albuquerque, Rio Rancho, Santa Fe, South Valley, Los Lunas, Belen, and Bernalillo—from our location at 8800 Lomas Blvd NE, Albuquerque, NM 87112. Check current service specials before booking.

• Convenient online booking anytime
• Factory-authorized Hyundai alignment equipment
• Before/after printout included with service

Your 2025 Hyundai Sonata receives a full steering and suspension inspection to confirm components can hold precise settings. We verify tire pressure, mount the vehicle on Hyundai-approved alignment equipment, and measure caster, camber, and toe at all four corners. Technicians then adjust angles to factory specification, correcting pull and reducing irregular wear. You’ll receive a printed before/after report that documents initial and final readings, plus a verification road test to confirm on-road tracking. If any parts are worn, we’ll explain options first so the finished alignment is accurate and long-lasting. Ready to book? Use our schedule service tool, and don’t forget to review service specials.

We support drivers throughout the Central New Mexico region—including Albuquerque, Rio Rancho, Santa Fe, South Valley, Los Lunas, Belen, and Bernalillo—with OEM-spec alignment service for the 2025 Hyundai Sonata. Local conditions like ongoing road construction, sharp canyon routes, and seasonal potholes can knock angles out of spec. Our factory-authorized Hyundai Service Center uses manufacturer-approved targets and software to set both front and rear geometry precisely. Visit us on the southeast corner of Lomas and Wyoming at 8800 Lomas Blvd NE, Albuquerque, NM 87112. Have questions or need directions? Schedule an appointment online and we’ll confirm details by email or text.

Factory alignment for the 2025 Hyundai Sonata targets specific caster, camber, and toe values for stability, steering return, and tire life. We reference Hyundai service data and set front and rear independently, making precise camber and toe corrections where adjustment is provided. OEM-approved alignment equipment ensures repeatable measurements and accurate sensor calibration. If inspection finds play in tie rods, control arm bushings, or strut mounts, we’ll address that first so specs hold after you leave. Bring your 2025 Hyundai Sonata to Larry H. Miller Southwest Hyundai Albuquerque in Albuquerque for a factory-spec alignment — schedule service.