2024 Hyundai Sonata Alignment in Albuquerque, NM

Plan an alignment about every 2–3 years or 30,000 miles, and sooner after suspension work or a major pothole impact.

Albuquerque’s mix of city streets, construction zones, and high-desert road trips can nudge your 2024 Hyundai Sonata out of spec over time. If you’ve replaced tires or suspension parts, or you’ve noticed changes in handling, schedule a check to protect tire life and steering precision. Use our online tool to schedule service and view service specials.

• General interval: every 2–3 years or 30,000 miles
• After suspension or steering component replacement
• After hitting a deep pothole or curb

Four common signs are uneven tire wear, the car pulling to one side, an off-center steering wheel, and vibration at speed.

If your 2024 Hyundai Sonata shows one or more of these symptoms, an alignment check can confirm whether caster, camber, or toe are out of spec. Addressing issues early helps extend tire life and restores steering feel. Our Hyundai-trained technicians can verify readings and advise next steps—book online to schedule service.

• Uneven or accelerated shoulder wear on tires
• Vehicle drifting or pulling on a straight road
• Steering wheel not centered when driving straight
• Vibration or wandering at highway speeds

You get caster, camber, and toe measured and adjusted to factory specifications, plus a printed before/after alignment report.

Your 2024 Hyundai Sonata receives a suspension/steering inspection, tire pressure check, precise OEM-spec measurements, and adjustments to restore factory geometry. A road test verifies straight tracking and steering-wheel centering. You’ll leave with documented readings for your records—schedule an appointment and check service specials for potential savings.

• Inspection of tie rods, ball joints, and bushings
• Caster/camber/toe adjustment to Hyundai factory spec
• Printed before/after results and verification road test

If parts like tie rods, ball joints, or struts are worn, an alignment won’t hold and those components must be replaced first.

Our technicians inspect your 2024 Hyundai Sonata before adjusting angles to ensure the suspension and steering can maintain settings. If play or damage is found, we’ll explain the findings and outline repair options so the final alignment is stable. Book a visit to confirm what’s needed and keep your Sonata tracking straight.

• Pre-alignment inspection identifies worn components
• We advise repairs before final alignment if needed
• Road test confirms the alignment will hold

No—if it tracks straight and tires wear evenly, you can wait until symptoms appear or parts are replaced.

For a symptom-free 2024 Hyundai Sonata with even tire wear, routine checks at rotation time are fine, but adjustments aren’t always necessary. After a curb hit, pothole, or suspension work, schedule a check to prevent premature wear. Use our online portal to schedule service and browse service specials.

• Skip adjustments when tracking and wear are normal
• Schedule after impacts or component replacement
• Periodic checks help catch subtle misalignment

Yes—after caster, camber, and toe are set to spec, you receive a printed before/after report and a verification road test is performed.

This documentation shows your 2024 Hyundai Sonata readings at check-in and after adjustments, confirming angles meet Hyundai specifications. The road test validates steering-wheel centering and straight-line tracking. Keep the printout with your maintenance records for future reference.

• Documented pre- and post-adjustment readings
• Verification road test for tracking and feel
• Settings targeted to Hyundai factory specifications

Your visit begins with a steering and suspension inspection on your 2024 Hyundai Sonata, checking tie rods, ball joints, control-arm bushings, and struts, followed by a tire pressure set and wheel condition review. We then mount the vehicle on an alignment rack and measure caster, camber, and toe at all four corners. Next, our technicians adjust each angle to Hyundai factory specifications and center the steering wheel. You’ll receive a printed before/after alignment report for documentation, and a verification road test confirms straight tracking and proper feel. To keep maintenance simple, you can schedule service online anytime and review current service specials before you arrive.

Proper alignment on your 2024 Hyundai Sonata targets Hyundai factory specifications for caster, camber, and toe—front and rear measured independently—so tires wear evenly and the car tracks straight. Using OEM-calibrated alignment equipment, our team measures baseline angles, corrects thrust, and adjusts primary and secondary angles as needed. Front caster and camber are balanced side to side for confident stability, while toe is set precisely to reduce scrub and improve fuel economy. Rear camber and toe are dialed in to ensure the vehicle’s thrust line is centered for straight-line stability. Bring your 2024 Hyundai Sonata to Larry H. Miller Southwest Hyundai Albuquerque in Albuquerque for a factory-spec alignment — schedule service.

Serving Central New Mexico—including Albuquerque, Rio Rancho, Santa Fe, South Valley, Los Lunas, Belen, and Bernalillo—our team understands local driving that mixes urban streets, desert highways, and construction zones. Potholes, curb strikes, and canyon roads can nudge your 2024 Hyundai Sonata out of spec, causing pull or uneven wear. Our factory-authorized Hyundai Service Center provides precise four-wheel alignments, documented with a before/after printout, to protect your tires and steering feel. We’re easy to find on the southeast corner of Lomas and Wyoming at 8800 Lomas Blvd NE, Albuquerque, NM 87112. Ready to restore factory geometry on your 2024 Hyundai Sonata? Schedule your appointment online and check service specials for current offers.